Star Wars Items

Darth Vader FX Lightsaber with Stand

Darth Vader FX Lightsaber with Stand

This official reproduction of Darth Vader's lightsaber from Star Wars: A New Hope has a glowing, bright red blade that ignites with realistic power-up and power-down light effects Features authentic lightsaber sound effects digitally recorded from the movie and four motion sensor controlled sound effects: power-up, idle hum, clash, and power-down. The durable metal hilt looks and feels like a real lightsaber and the sturdy blade is permanently attached to the hilt. Blade is permanently attached and is made of polycarbonate.Product FAQQ: How do the light and sound effects work in the Force FX lightsaber? A: The Force FX lightsaber incorporates two motion sensors which sense both the motion of the blade as well as when it comes in contact with something. An on-board, multi-channel chip is programmed with digital sound effects originally created for the movie by Skywalker Sound. The Force FX lightsaber replicates the following sound effects: Power-up, Idle hum, Swing (with pitch change), Clash, Power-down. Q: How long will the light in the Force FX lightsaber last? A: It should run for several hours on a fresh set of batteries. The electronics, if cared for properly, should last for several thousand hours of use. Replace the batteries whenever the performance begins to change, such as reduced brightness or volume. Q: Can I use my Force FX lightsaber for dueling? A: This product should not be used to strike others. Although the blade is very durable, it should never be used for fighting or dueling. The Force FX lightsaber was produced by Master Replicas as a collectible; it was not intended for dueling.

Billy Dee Williams Signed 8x10: Lando Calrissian

Billy Dee Williams Signed 8x10: Lando Calrissian

Lando Calrissian. The name itself evokes the danger and romance of Cloud City in The Empire Strikes Back. Whether a smuggler, card player, scoundrel, or hero, all can agree that Lando is one of a kind. No better image captures the conflict he faces-in order to save his people from the Empire, he must forsake long-time friend Han Solo and surrender the rebels to Darth Vader. Now you can get this exclusive Comic-Con International 2004 branded image of Lando with authentic signature of Billy Dee Williams only from StarWarsShop.com. Measures 8x10 inches. NOTE: StarWarsShop.com provides 100% authentic autographs that are only obtained through C2 Ventures. C2 Ventures offers a lifetime guarantee on the authenticity of each and every photo they sell. C2 Ventures acquires its complete inventory directly from the celebrities. They photo document each and every signing. They do not buy or trade for merchandise with other dealers or collectors.

Darth Vader Scaled Replica Lightsaber with Stand

Darth Vader Scaled Replica Lightsaber with Stand

The Darth Vader Scaled Replica is one of three in Master Replicas' scaled Sith Collection. It is a .45 scale version of the Master Replicas Limited Edition lightsaber replica of the prop seen in Star Wars: A New Hope and measures approximately 5.25" long x 1" in diameter. The replica is constructed of the same high quality materials as the Limited Edition replicas - die-cast zinc, machined and chrome-plated brass and injection-molded plastic. The piece is finished with a "Krinkle" black finish on the emitter, rubber grips, and a spring-loaded button. Each detail is exactly 45% of the original size. The piece comes in a collectible quality presentation box with the prop story imprinted on the inside cover, accompanied by a Certificate of Authenticity and an individual display stand made of black injection molded plastic with clear supports for the replica. The top of the matte textured base is accented with a gold Star Wars logo and the name of the character. Randomly distributed in the master cartons will be the highly coveted gold plated Lightsaber Scaled Replica. These will comprise of 5% of the production run.Prop Story:Darth Vader, Dark Lord of the Sith, is one of the most feared figures in the galaxy. Once promising young Jedi Anakin Skywalker, he gave into his anger and turned to the dark side. Though transformed from Jedi to Sith, Vader retains his most-powerful weapon: his lightsaber.Vader's lightsaber prop used in Star Wars: A New Hope, was in reality an antique flash gun with the addition of a 6-bubble clear display panel, rubber grips along the base and a D-ring to the front shroud. The Darth Vader Lightsaber Scaled Replica has been reproduced in an exact 45% scale. That means that each detail is 0.45 times the original size.

Talking Darth Vader Wall Mount

Talking Darth Vader Wall Mount

Darth Vader, Dark Lord of the Sith, was a master of the dark side of the Force, and one of the Emperor's most trusted servants. Now you can hear his words of wisdom everyday with this talking wall mount Darth Vader. This high quality .5 scale reproduction of the Dark Lord is made of sturdy, corrugated cardboard with a high quality photo on the front side and can be hung on a hook, stuck to a wall or door (adhesive affixed to back of wall mount), or can stand on it's own. This wall mount is equipped with a motion sensor voice box with five different Darth Vader phrases (spoken by James Earl Jones himself):"What is thy bidding my Master?" "Your destiny lies with me Skywalker." "Now release your anger, only your hatred can destroy me." "The force is with you." "You are not a Jedi yet."

X-wing Starfighter Die Cast Model

X-wing Starfighter Die Cast Model

The X-wing has been brought to life by Code 3 Collectibles sculptors who meticulously recreated every detail of this legendary Star Wars vehicle. This incredible die cast model of the X-wing has 7 movable parts, and removable panels that expose the cockpit, hyperdrive and engine of this powerful ship. Included with your model is a removable R2-D2 unit as seen in the Star Wars sagas. The X-wing practically takes to flight with opening and closing wings allowing you to display it in attack mode or flight mode. Its wing span is over 11" and the model itself is 1/38 scale. The X-wing is replicated after the models used in the filming of Episode IV: A New Hope. Along with your model of the X-wing you will receive a Rebel Alliance patch, Panel Storage box, a specially made display base and Certificate of Authenticity. No Star Wars collection will be complete without this exquisite model of Luke Skywalker's X-wing Starfighter.Acrylic display case for Code 3 X-wing Starfighter Die Case Model available for $49.95.

Star Wars Foil Printed Poster

StarWarsShop is excited to bring this poster for Star Wars: A New Hope exclusively to fans and collectors in the United States! The poster was previously available only in the United Kingdom. You might find that the art looks familiar. After all, it graced the Star Wars Trilogy VHS release back in 1995. However, we know that you have never seen the art captured like this before! The printing is done using a proprietary technique called DUFEX printing.DUFEX effectively brings the dimensions of light, movement and depth to foil prints. Yes, you read right, foil prints! DUFEX prints art onto aluminum foil lined cardboard, using UV formulated inks, which allow the reflective shine to be retained. Then, specialists use engraving techniques that add a range of stunning light reflective textures to the foil. The end result is an almost holographic appearance!The poster is shrink wrapped to sturdy cardboard, and is shipped flat.

Star Wars 12"x18" 3-D Lenticular Poster

In commemoration of the release of the unaltered trilogy on DVD, StarWarsShop has resurrected three iconic poster images from the classic era to offer as stunning 12"x18" lenticular prints! The lenticular process allows an image to appear three-dimensional when tilted to the light. For A New Hope, artist Noriyoshi Ohrai's stunning poster artwork for Japan's 1982 release has been reprinted for the first time since its limited original run over two decades ago. Star Wars poster aficionados recognize Ohrai's work for his lush colors, meticulous detail, and inspired use of composition. This artwork, which showcases everyone's favorite Corellian freighter among the heroes, villains, and hardware of Star Wars, has been given the lenticular 3-D treatment, allowing the various elements to "float" over Ohrai's brilliant nebulous backdrop. Fans of Ohrai will also want to check out StarWarsShop's Return of the Jedi lenticular, which recreates the fan-favorite "Starfall" poster artwork in 3-D lenticular form.Limited to 1,000 pieces and comes with a certificate of authenticity. Prototype Pictured.

Yoda Fireworks Poster

Fans asked for it, and now StarWarsShop -- and only StarWarsShop -- has it!Almost a year ago, during the hottest weeks of 2005's "Summer of Sith", fans noticed a new poster image printed larger-than-life in newspapers and magazines across the nation in the days leading into the July 4th weekend. Depicting a saber-wielding Yoda against an explosion of red and blue fireworks, the unforgettable "May the Fourth Be With You" ad had many fans scouring the internet trying to locate a poster version, ultimately coming up empty-handed. To fans' disappointment, the stunning "Yoda Fireworks" artwork was never made into a poster at all, relegated instead to an exclusive short run in newspapers and magazines. Now, just in time for the 2006 summer season, StarWarsShop is offering up the poster-size version of "Yoda Fireworks" that fans have been asking for -- fans that included it among their top ten favorite Star Wars posters of all time in a recent Bantha Tracks poll (a commendable feat, given this image was not even made into a poster -- until now!). Approximately 40" tall, this striking poster features the original ticket copy seen on the original ad, preserving the spirit and excitement of last year's Star Wars summer. The timeless image of everyone's favorite Jedi Master against a brilliant backdrop of colorful fireworks is one that should endure for years to come, and will make the perfect marquee to announce your summer Star Wars DVD marathons. A StarWarsShop exclusive, there will only be a one-time, limited print run, so make sure to grab yours today!

The Empire Strikes Back 12"x18" 3-D Lenticular Poster

In commemoration of the release of the unaltered trilogy on DVD, StarWarsShop has resurrected three iconic poster images from the classic era to offer as stunning 12"x18" lenticular prints! The lenticular process allows an image to appear three-dimensional when tilted to the light. Ralph McQuarrie created this brilliant painting of a pensive Yoda shortly after the release of The Empire Strikes Back, which ultimately found its way onto the 1982 poster advertising the film's radio dramatization. Many fans feel this artwork captures the Jedi Master most effectively, appearing to commune with the Force which "surrounds and penetrates" his Dagobah abode. Yoda, the creatures around him, and the glowing hut in the distance all appear to exist on different planes through the lenticular process, a first for this stunning piece of artwork. Fans of retro Star Wars poster graphics will also want to check out the other two lenticulars offered in this series, which bring artist Noriyoshi Ohrai's brilliant Star Wars and Return of the Jedi artworks to life in three dimensions. Limited to 1,000 pieces and comes with a certificate of authenticity. Prototype Pictured.

Return of the Jedi 12"x18" 3-D Lenticular Poster

In commemoration of the release of the unaltered trilogy on DVD, StarWarsShop has resurrected three iconic poster images from the classic era to offer as stunning 12"x18" lenticular prints! The lenticular process allows an image to appear three-dimensional when tilted to the light. One of the most sought-after Star Wars posters by collectors is the painfully obscure Return of the Jedi "Starfall" commemorative print published by Japan's Yamakatsu company in 1983. This stunning artwork, executed by Japan's premiere trilogy poster artist Noriyoshi Ohrai, depicts the stalwart droids R2-D2 and C-3PO against a fiery nebulous sky, flanked by the blaze of Jedi and Sith lightsabers. Moreso than any other poster image, this one speaks to the Star Wars saga as a whole, as the droids represent the common thread throughout the six chapter story. The droids and saber blades are brilliantly "lifted" from the nebulous backdrop by the lenticular process, elevating the visual appeal of Ohrai's artwork to new highs. Fans of Ohrai will also want to check out StarWarsShop's A New Hope lenticular, which reproduces a three-dimensional illusion of one of the artist's most compelling poster artworks from the first film. Limited to 1,000 pieces and comes with a certificate of authenticity. Prototype Pictured.

R2D2 Fathead Wall Graphic

Imperial Stormtrooper Fathead Wall Graphic

Yoda Fathead Wall Graphic

Darth Vader Fathead Wall Graphic

C-3PO Fathead Wall Graphic

BACK